Edge 8000
6WIND Router Version 5.6.7
  • 1. User Guide - CLI / NETCONF
    • 1.1. Preface
    • 1.2. Key features
    • 1.3. Basics
    • 1.4. System
    • 1.5. Network interfaces
    • 1.6. IP Networking
    • 1.7. Routing
      • 1.7.1. Static routes
      • 1.7.2. L3VRF
      • 1.7.3. Routing utilities
      • 1.7.4. BGP
        • BGP Overview
        • BGP configuration
        • BGP configuration options
        • BGP security
        • BGP Flowspec
        • BGP in virtual routers
        • BGP and SNMP
        • BFD In BGP
        • RPKI In BGP
        • BMP In BGP
        • BGP labeled unicast
        • BGP VPNS
      • 1.7.5. ISIS
      • 1.7.6. MPLS
      • 1.7.7. DMVPN and NHRP
      • 1.7.8. OSPF
      • 1.7.9. RIP
      • 1.7.10. OSPFv3
      • 1.7.11. RIPNG
      • 1.7.12. BFD
      • 1.7.13. Path Monitoring
      • 1.7.14. Policy-based routing
    • 1.8. QoS
    • 1.9. Security
    • 1.10. High Availability
    • 1.11. Monitoring
    • 1.12. Services
    • 1.13. Maximum Capacity Specifications
    • 1.14. Troubleshooting
    • 1.15. Automation
  • 2. Command Reference
Edge 8000
  • 1. User Guide - CLI / NETCONF
  • 1.7. Routing
  • 1.7.4. BGP
  • BGP VPNS

BGP VPNSΒΆ

  • VPNs using BGP
    • Introduction
    • L3VPN service
    • EVPN service
    • Control and distribute routing information across BGP VPNs
  • BGP for L3VPN
    • L3VPN basic configuration
    • Configure locally route leaking between VPNs
    • Interconnect two geographically separate VPNs
    • Interconnect traffic between direct connections
    • L3VPN advanced configuration
  • BGP for EVPN
    • EVPN common configuration
    • EVPN routed configuration
    • EVPN bridged configuration
    • Use case for routing mode
    • Use case for bridging mode
Next Previous

© Copyright 2023 6WIND S.A.