2. Command ReferenceΒΆ
- 2.1. cmd
- 2.1.1. cmd banner
- 2.1.2. cmd reboot
- 2.1.3. cmd poweroff
- 2.1.4. cmd ping
- 2.1.5. cmd traceroute
- 2.1.6. cmd traffic-capture
- 2.1.7. cmd traffic-capture new
- 2.1.8. cmd traffic-capture list
- 2.1.9. cmd traffic-capture read
- 2.1.10. cmd traffic-capture export
- 2.1.11. cmd traffic-capture flush
- 2.1.12. cmd traffic-capture delete
- 2.1.13. cmd identify-port
- 2.1.14. cmd troubleshooting-report
- 2.1.15. cmd dns proxy clear-cache
- 2.1.16. cmd dhcp-client renew-lease
- 2.1.17. cmd bgp rpki ssh-key create
- 2.1.18. cmd bgp rpki ssh-key list
- 2.1.19. cmd bgp rpki ssh-key delete
- 2.1.20. cmd bgp rpki ssh-host add
- 2.1.21. cmd bgp rpki ssh-host delete
- 2.1.22. cmd certificate import
- 2.1.23. cmd certificate export
- 2.1.24. cmd certificate add
- 2.1.25. cmd certificate delete
- 2.2. show
- 2.2.1. show vrfs
- 2.2.2. show summary
- 2.2.3. show interface
- 2.2.4. show interface throughput
- 2.2.5. show ipv4-routes
- 2.2.6. show ipv6-routes
- 2.2.7. show mpls fec table
- 2.2.8. show mpls table
- 2.2.9. show disk
- 2.2.10. show bgp
- 2.2.11. show bgp bmp
- 2.2.12. show bgp rpki cache-connection
- 2.2.13. show bgp rpki cache-server
- 2.2.14. show bgp rpki prefix-table
- 2.2.15. show isis
- 2.2.16. show evpn
- 2.2.17. show ospf
- 2.2.18. show rip
- 2.2.19. show ospf6
- 2.2.20. show ripng
- 2.2.21. show mpls ldp
- 2.2.22. show bfd
- 2.2.23. show path-monitoring
- 2.2.24. show nhrp
- 2.2.25. show nhrp6
- 2.2.26. show pbr
- 2.2.27. show log
- 2.2.28. show logins
- 2.2.29. show ntp
- 2.2.30. show ntp clients
- 2.2.31. show dhcp-relay
- 2.2.32. show dhcp-server
- 2.2.33. show neighbors
- 2.2.34. show conntracks
- 2.2.35. show product
- 2.2.36. show fast-path cpu-usage
- 2.2.37. show fast-path table-usage
- 2.2.38. show fast-path arp parameters
- 2.2.39. show fast-path statistics
- 2.2.40. show ike
- 2.2.41. show ha-neighbor
- 2.2.42. show ha-conntrack
- 2.2.43. show vxlan fdb
- 2.2.44. show bridge fdb
- 2.2.45. show dns-server
- 2.2.46. show certificate list
- 2.2.47. show certificate
- 2.2.48. show certificate key
- 2.2.49. show commit
- 2.3. flush
- 2.4. system
- 2.5. auth
- 2.6. aaa
- 2.7. vrf
- 2.8. ssh-server
- 2.9. netconf-server
- 2.10. dns
- 2.11. dns-server
- 2.12. ipv6-autoconf
- 2.13. lldp
- 2.14. kpi
- 2.15. telegraf
- 2.16. tracker
- 2.16.1. bfd
- type
- source (pushed)
- address (mandatory) (pushed)
- interface (pushed)
- vrf (mandatory) (pushed)
- l3vrf (pushed)
- echo-mode
- detection-multiplier
- desired-transmission-interval
- required-receive-interval
- desired-echo-transmission-interval
- discriminator (state only)
- state (state only) (pushed)
- diagnostic (state only) (pushed)
- last-down-time (state only)
- last-up-time (state only)
- session-down-count (state only)
- session-up-count (state only)
- control-packet-input-count (state only)
- control-packet-output-count (state only)
- echo-packet-input-count (state only)
- echo-packet-output-count (state only)
- zebra-notification-count (state only)
- remote (state only)
- negociated (state only)
- 2.16.2. icmp
- 2.16.1. bfd
- 2.17. nat
- 2.18. ntp
- 2.19. firewall
- 2.19.1. ipv4 filter
- input
- forward
- output
- chain
- 2.19.2. ipv4 mangle
- prerouting
- input
- forward
- output
- postrouting
- chain
- 2.19.3. ipv4 raw
- prerouting
- output
- chain
- 2.19.4. ipv6 filter
- input
- forward
- output
- chain
- 2.19.5. ipv6 mangle
- prerouting
- input
- forward
- output
- postrouting
- chain
- 2.19.6. ipv6 raw
- prerouting
- output
- chain
- 2.19.1. ipv4 filter
- 2.20. network-port (state only)
- 2.21. interface
- 2.21.1. bridge
- mtu
- promiscuous
- enabled (pushed)
- description
- ageing-time
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ethernet
- ipv6
- network-stack
- stp
- link-interface
- qos
- ingress
- egress
- counters (state only)
- 2.21.2. gre
- mtu
- promiscuous
- enabled (pushed)
- description
- ttl
- tos
- link-interface
- link-vrf
- local (mandatory)
- remote
- checksum
- sequence-number
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- network-stack
- key
- qos
- ingress
- egress
- counters (state only)
- 2.21.3. gretap
- mtu
- promiscuous
- enabled (pushed)
- description
- ttl
- tos
- link-interface
- link-vrf
- local (mandatory)
- remote
- checksum
- sequence-number
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- network-stack
- ethernet
- key
- qos
- ingress
- egress
- counters (state only)
- 2.21.4. qos-hub
- mtu
- promiscuous
- enabled (pushed)
- description
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- qos
- ingress
- policy (config only)
- rate-limit
- policy (state only)
- egress
- scheduler (config only)
- policy (config only)
- rate-limit
- scheduler (state only)
- is-root (state only)
- template-name (state only)
- core (state only)
- pq (state only)
- pb-dwrr (state only)
- htb (state only)
- nb-queue (state only)
- default-queue (state only)
- divisor (state only)
- stats (state only)
- queue (state only)
- size (state only)
- child-scheduler-id (state only)
- bandwidth (state only)
- burst (state only)
- ceiling (state only)
- ceiling-burst (state only)
- layer1-overhead (state only)
- quantum (state only)
- priority (state only)
- child-queue (state only)
- policer (state only)
- shaper (state only)
- class (state only)
- stats (state only)
- sfq (state only)
- policy (state only)
- ingress
- counters (state only)
- 2.21.5. ipip
- mtu
- promiscuous
- enabled (pushed)
- description
- local (mandatory)
- remote (mandatory)
- ttl
- tos
- link-interface
- link-vrf
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- network-stack
- qos
- ingress
- egress
- counters (state only)
- 2.21.6. lag
- mtu
- promiscuous
- enabled (pushed)
- description
- mode (mandatory)
- xmit-hash-policy
- lacp-rate
- mii-link-monitoring
- arp-interval
- arp-ip-target
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ethernet
- ipv6
- network-stack
- link-interface
- primary
- qos
- ingress
- egress
- counters (state only)
- 2.21.7. loopback
- 2.21.8. physical
- mtu
- promiscuous
- enabled (pushed)
- description
- port (mandatory)
- rx-cp-protection
- rx-cp-protection-offload
- tx-cp-protection
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- network-stack
- ethernet
- qos
- ingress
- policy (config only)
- rate-limit
- policy (state only)
- egress
- scheduler (config only)
- policy (config only)
- rate-limit
- scheduler (state only)
- is-root (state only)
- template-name (state only)
- core (state only)
- pq (state only)
- pb-dwrr (state only)
- htb (state only)
- nb-queue (state only)
- default-queue (state only)
- divisor (state only)
- stats (state only)
- queue (state only)
- size (state only)
- child-scheduler-id (state only)
- bandwidth (state only)
- burst (state only)
- ceiling (state only)
- ceiling-burst (state only)
- layer1-overhead (state only)
- quantum (state only)
- priority (state only)
- child-queue (state only)
- policer (state only)
- shaper (state only)
- class (state only)
- stats (state only)
- sfq (state only)
- policy (state only)
- ingress
- counters (state only)
- 2.21.9. pimreg (state only)
- mtu (state only)
- promiscuous (state only)
- enabled (state only) (pushed)
- description (state only)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4 (state only)
- enabled (state only)
- address (state only)
- neighbor (state only)
- dhcp (state only)
- enabled (state only)
- timeout (state only)
- retry (state only)
- select-timeout (state only)
- reboot (state only)
- initial-interval (state only)
- dhcp-lease-time (state only)
- dhcp-client-identifier-ascii (state only)
- dhcp-client-identifier-hexa (state only)
- host-name (state only)
- request (state only)
- current-lease (state only)
- ipv6 (state only)
- counters (state only)
- network-stack (state only)
- 2.21.10. svti
- mtu
- promiscuous
- enabled (pushed)
- description
- svti-id (mandatory)
- link-vrf
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- link-interface (state only)
- ipv4
- ethernet
- ipv6
- network-stack
- qos
- ingress
- egress
- counters (state only)
- 2.21.11. svti-template (config only)
- 2.21.12. system-loopback (state only)
- mtu (state only)
- promiscuous (state only)
- enabled (state only) (pushed)
- description (state only)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4 (state only)
- enabled (state only)
- address (state only)
- neighbor (state only)
- dhcp (state only)
- enabled (state only)
- timeout (state only)
- retry (state only)
- select-timeout (state only)
- reboot (state only)
- initial-interval (state only)
- dhcp-lease-time (state only)
- dhcp-client-identifier-ascii (state only)
- dhcp-client-identifier-hexa (state only)
- host-name (state only)
- request (state only)
- current-lease (state only)
- ipv6 (state only)
- counters (state only)
- 2.21.13. veth
- mtu
- promiscuous
- enabled (pushed)
- description
- link-interface (mandatory)
- link-vrf (mandatory)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- network-stack
- ethernet
- qos
- ingress
- egress
- counters (state only)
- 2.21.14. vlan
- mtu
- promiscuous
- enabled (pushed)
- description
- vlan-id (mandatory)
- link-interface (mandatory)
- protocol
- link-vrf
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ethernet
- ipv6
- network-stack
- egress-priority-mapping
- ingress-priority-mapping
- qos
- ingress
- egress
- counters (state only)
- 2.21.15. vxlan
- mtu
- promiscuous
- enabled (pushed)
- description
- vni (mandatory)
- group
- remote
- local
- ttl
- tos
- link-interface
- link-vrf
- learning
- gbp
- dst
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ethernet
- ipv6
- network-stack
- src-range
- qos
- ingress
- egress
- counters (state only)
- 2.21.16. xvrf
- mtu
- promiscuous
- enabled (pushed)
- description
- link-interface (mandatory)
- link-vrf (mandatory)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- qos
- ingress
- egress
- counters (state only)
- 2.21.1. bridge
- 2.22. qos
- 2.22.1. class-mask (config only)
- 2.22.2. policer (config only)
- 2.22.3. shared-policer
- 2.22.4. shaper (config only)
- 2.22.5. scheduler (config only)
- description (config only)
- core (config only)
- pq (config only)
- pb-dwrr (config only)
- htb (config only)
- description (config only)
- divisor (config only)
- default-queue (config only)
- queue (config only)
- description (config only)
- bandwidth (config only) (mandatory)
- burst (config only)
- ceiling (config only)
- ceiling-burst (config only)
- layer1-overhead (config only)
- quantum (config only)
- size (config only)
- priority (config only)
- policer (config only)
- child-queue (config only)
- child-scheduler (config only)
- class (config only)
- sfq (config only)
- 2.22.6. class (config only)
- 2.22.7. selector (config only)
- 2.22.8. policy (config only)
- 2.23. vrrp
- 2.23.1. global
- 2.23.2. interface
- mtu
- promiscuous
- enabled (pushed)
- description
- version
- link-interface (mandatory)
- garp-delay
- use-vmac
- vmac-xmit-base
- vrid (mandatory)
- priority
- init-state
- preempt
- preempt-delay
- advertisement-interval
- track-link-interface
- track-interface
- track
- track-fast-path
- notify-ha-group
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- state (state only)
- network-stack
- authentication
- unicast-peer
- virtual-address
- virtual-route
- counters (state only)
- ipv4 (state only)
- enabled (state only)
- address (state only)
- neighbor (state only)
- dhcp (state only)
- enabled (state only)
- timeout (state only)
- retry (state only)
- select-timeout (state only)
- reboot (state only)
- initial-interval (state only)
- dhcp-lease-time (state only)
- dhcp-client-identifier-ascii (state only)
- dhcp-client-identifier-hexa (state only)
- host-name (state only)
- request (state only)
- current-lease (state only)
- ipv6 (state only)
- ethernet (state only)
- 2.24. ike
- 2.24.1. enabled (pushed)
- 2.24.2. pool
- 2.24.3. certificate
- 2.24.4. certificate-authority
- 2.24.5. pre-shared-key
- 2.24.6. eap-key
- 2.24.7. eap-radius
- 2.24.8. logging
- 2.24.9. global-options
- threads
- acquire-timeout
- half-open-timeout
- sa-table-size
- sa-table-segments
- install-routes
- routing-table
- routing-table-prio
- retransmit-tries
- retransmit-timeout
- retransmit-base
- delete-rekeyed
- delete-rekeyed-delay
- make-before-break
- interface-use
- interface-ignore
- snmp
- mobike-prefer-best-path
- install-vip
- install-vip-on
- retry-initiate-interval
- dos-protection
- sp-hash-ipv4
- sp-hash-ipv6
- 2.24.10. ha
- 2.24.11. ike-policy-template (config only)
- 2.24.12. ipsec-policy-template (config only)
- start-action (config only)
- close-action (config only)
- dpd-action (config only)
- replay-window (config only)
- rekey-time (config only)
- inactivity (config only)
- life-time (config only)
- rand-time (config only)
- rekey-bytes (config only)
- life-bytes (config only)
- rand-bytes (config only)
- rekey-packets (config only)
- life-packets (config only)
- rand-packets (config only)
- encap-copy-dscp (config only)
- decap-copy-dscp (config only)
- encap-copy-df (config only)
- esp-proposal (config only)
- ah-proposal (config only)
- 2.24.13. vpn
- enabled
- description
- version
- local-address
- remote-address
- local-id
- remote-id
- local-eap-id
- remote-eap-id
- certificate
- remote-ca-certificate
- vip-request
- vip-pool
- dynamic-svti (config only)
- ike-policy
- ipsec-policy
- security-policy
- 2.24.14. ike-sas (state only)
- 2.24.15. task-processing (state only)
- 2.24.16. counters (state only)
- ike-rekey-init (state only)
- ike-rekey-resp (state only)
- child-rekey (state only)
- invalid (state only)
- invalid-spi (state only)
- ike-init-in-req (state only)
- ike-init-in-resp (state only)
- ike-init-out-req (state only)
- ike-init-out-resp (state only)
- ike-auth-in-req (state only)
- ike-auth-in-resp (state only)
- ike-auth-out-req (state only)
- ike-auth-out-resp (state only)
- create-child-in-req (state only)
- create-child-in-resp (state only)
- create-child-out-req (state only)
- create-child-out-resp (state only)
- info-in-req (state only)
- info-in-resp (state only)
- info-out-req (state only)
- info-out-resp (state only)
- 2.24.17. vpn-counters (state only)
- ike-rekey-init (state only)
- ike-rekey-resp (state only)
- child-rekey (state only)
- invalid (state only)
- invalid-spi (state only)
- ike-init-in-req (state only)
- ike-init-in-resp (state only)
- ike-init-out-req (state only)
- ike-init-out-resp (state only)
- ike-auth-in-req (state only)
- ike-auth-in-resp (state only)
- ike-auth-out-req (state only)
- ike-auth-out-resp (state only)
- create-child-in-req (state only)
- create-child-in-resp (state only)
- create-child-out-req (state only)
- create-child-out-resp (state only)
- info-in-req (state only)
- info-in-resp (state only)
- info-out-req (state only)
- info-out-resp (state only)
- 2.24.18. ike-sa (state only)
- name (state only)
- version (state only)
- state (state only)
- local-address (state only)
- remote-address (state only)
- local-port (state only)
- remote-port (state only)
- local-id (state only)
- remote-id (state only)
- remote-eap-id (state only)
- initiator-spi (state only)
- responder-spi (state only)
- enc-alg (state only)
- auth-alg (state only)
- aead-alg (state only)
- prf-alg (state only)
- dh-group (state only)
- established-time (state only)
- rekey-time (state only)
- reauth-time (state only)
- udp-encap (state only)
- mobike (state only)
- local-vip (state only)
- remote-vip (state only)
- child-sa (state only)
- name (state only)
- state (state only)
- reqid (state only)
- protocol (state only)
- udp-encap (state only)
- mobike (state only)
- spi-in (state only)
- spi-out (state only)
- svti-id-in (state only)
- svti-id-out (state only)
- enc-alg (state only)
- auth-alg (state only)
- aead-alg (state only)
- dh-group (state only)
- esn (state only)
- bytes-in (state only)
- packets-in (state only)
- bytes-out (state only)
- packets-out (state only)
- installed-time (state only)
- rekey-time (state only)
- life-time (state only)
- mode (state only)
- local-ts (state only)
- remote-ts (state only)
- 2.24.19. pool-lease (state only)
- 2.25. snmp
- 2.26. routing
- 2.26.1. global
- ipv4-access-list
- ipv6-access-list
- logging
- traffic-engineering
- ipv4-prefix-list
- ipv6-prefix-list
- route-map
- seq
- policy (mandatory)
- description
- call
- on-match
- match
- set
- seq
- bgp
- 2.26.2. static
- 2.26.3. interface
- isis
- ip nhrp
- ipv6 nhrp
- ip ospf
- ipv6 ospf6
- ip rip
- ipv6 ripng
- 2.26.4. evpn (state only)
- 2.26.5. bgp
- enabled (pushed)
- as (mandatory)
- as-notation
- always-compare-med
- l3vni
- cluster-id
- coalesce-time
- deterministic-med
- ebgp-connected-route-check
- fast-external-failover
- graceful-shutdown
- log-neighbor-changes
- network-import-check
- route-reflector-allow-outbound-policy
- reject-as-sets
- router-id
- ebgp-requires-policy
- neighbor-total-count (state only)
- bestpath
- client-to-client
- confederation
- graceful-restart
- listen
- max-med
- packet-rw-quantum
- tcp-keepalive
- update-delay
- address-family
- neighbor-group
- remote-as
- capability
- capability-negotiate
- ebgp-multihop
- enforce-first-as
- enforce-multihop
- neighbor-description
- override-capability
- passive
- password
- solo
- strict-capability-match
- ttl-security-hops
- update-source
- sender-as-path-loop-detection
- track
- check-control-plane-failure
- remote-neighbor-group (state only)
- remote-router-id (state only)
- state (state only)
- min-time-btwn-advertisement (state only)
- last-reset (state only)
- bgp-connection (state only)
- connect-retry-timer (state only)
- estimated-rount-trip-time (state only)
- local-as
- shutdown
- timers
- address-family
- ipv4-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-multicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-labeled-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-flowspec
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- filter-list
- prefix-list
- route-map
- ipv4-vpn
- enabled
- unsuppress-map
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- ipv6-unicast
- enabled
- nexthop-local-unchanged
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-multicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-labeled-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-flowspec
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- filter-list
- prefix-list
- route-map
- ipv6-vpn
- enabled
- unsuppress-map
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- l2vpn-evpn
- enabled
- nexthop-self
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- allowas-in
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- route-map
- link-state-non-vpn
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- allowas-in
- send-community
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- route-map
- maximum-prefix
- nexthop-self
- ipv4-unicast
- connections (state only)
- local-host (state only)
- remote-host (state only)
- nexthop (state only)
- thread (state only)
- message-statistics (state only)
- packet-wait-process (state only)
- packet-wait-written (state only)
- open-sent (state only)
- opens-received (state only)
- notifications-sent (state only)
- notifications-received (state only)
- updates-sent (state only)
- updates-received (state only)
- keepalives-sent (state only)
- keepalives-received (state only)
- route-refresh-sent (state only)
- route-refresh-received (state only)
- capability-sent (state only)
- capability-received (state only)
- total-sent (state only)
- total-received (state only)
- neighbor
- neighbor-group
- interface
- port
- remote-as
- capability
- capability-negotiate
- ebgp-multihop
- enforce-first-as
- enforce-multihop
- neighbor-description
- override-capability
- passive
- password
- solo
- strict-capability-match
- ttl-security-hops
- update-source
- sender-as-path-loop-detection
- track
- check-control-plane-failure
- remote-neighbor-group (state only)
- remote-router-id (state only)
- state (state only)
- min-time-btwn-advertisement (state only)
- last-reset (state only)
- bgp-connection (state only)
- connect-retry-timer (state only)
- estimated-rount-trip-time (state only)
- local-as
- shutdown
- timers
- address-family
- ipv4-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-multicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-labeled-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv4-flowspec
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- filter-list
- prefix-list
- route-map
- ipv4-vpn
- enabled
- unsuppress-map
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- ipv6-unicast
- enabled
- nexthop-local-unchanged
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-multicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-labeled-unicast
- enabled
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- capability-orf-prefix-list
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- default-originate
- ipv6-flowspec
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- filter-list
- prefix-list
- route-map
- ipv6-vpn
- enabled
- unsuppress-map
- as-override
- maximum-prefix-out
- weight
- send-community
- allowas-in
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- addpath
- distribute-list
- as-outbound-update
- maximum-prefix
- nexthop-self
- filter-list
- prefix-list
- route-map
- l2vpn-evpn
- enabled
- nexthop-self
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- allowas-in
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- route-map
- link-state-non-vpn
- enabled
- route-reflector-client
- route-server-client
- soft-reconfiguration-inbound
- attribute-unchanged
- allowas-in
- send-community
- unsuppress-map
- update-group-id (state only)
- sub-group-id (state only)
- packet-queue-length (state only)
- accepted-prefix (state only)
- inbound-ebgp-requires-policy (state only)
- outbound-ebgp-requires-policy (state only)
- route-map
- maximum-prefix
- nexthop-self
- ipv4-unicast
- connections (state only)
- local-host (state only)
- remote-host (state only)
- nexthop (state only)
- thread (state only)
- message-statistics (state only)
- packet-wait-process (state only)
- packet-wait-written (state only)
- open-sent (state only)
- opens-received (state only)
- notifications-sent (state only)
- notifications-received (state only)
- updates-sent (state only)
- updates-received (state only)
- keepalives-sent (state only)
- keepalives-received (state only)
- route-refresh-sent (state only)
- route-refresh-received (state only)
- capability-sent (state only)
- capability-received (state only)
- total-sent (state only)
- total-received (state only)
- unnumbered-neighbor
- rpki
- bmp
- 2.26.6. isis
- enabled (pushed)
- instance
- is-type
- area-address
- dynamic-hostname
- log-adjacency-changes
- metric-style
- purge-originator
- attach-send
- attach-receive-ignore
- overload
- area-password
- domain-password
- traffic-engineering
- fast-reroute
- default-information-originate
- redistribute
- lsp
- spf
- multi-topology
- flex-algorithm
- segment-routing
- neighbor (state only)
- 2.26.7. ldp
- 2.26.8. nhrp
- 2.26.9. ospf
- 2.26.10. rip
- 2.26.11. ospf6
- 2.26.12. ripng
- 2.26.13. policy-based-routing
- 2.26.14. rib (state only)
- ipv4-count (state only)
- ipv6-count (state only)
- ipv4-route (state only)
- ipv6-route (state only)
- 2.26.1. global
- 2.27. DHCP
- 2.27.1. server
- enabled (pushed)
- default-lease-time
- max-lease-time
- dhcp-options
- subnet
- dhcp-server-leases (state only)
- 2.27.2. relay
- 2.27.1. server
- 2.28. fast-path
- 2.28.1. enabled (pushed)
- 2.28.2. port
- 2.28.3. core-mask
- 2.28.4. cp-protection
- 2.28.5. crypto
- 2.28.6. advanced
- nb-mbuf
- machine-memory
- mainloop-sleep-delay
- offload
- vlan-strip
- intercore-ring-size
- software-txq
- mask-irq
- nb-rxd
- nb-txd
- reserve-hugepages
- ipv4-netfilter-cache
- ipv6-netfilter-cache
- ipv4-pre-ipsec-fragmentation
- ipv6-pre-ipsec-fragmentation
- ipv6-lpm-long-prefix-optimization
- hardware-queue-map
- mpls-egress-priority-mapping
- 2.28.7. limits
- fp-max-if
- fp-max-vrf
- ip4-max-addr
- ip4-max-route
- ip4-max-neigh
- ip6-max-addr
- ip6-max-route
- ip6-max-neigh
- pbr-max-rule
- filter4-max-rule
- filter6-max-rule
- filter4-max-ct
- filter6-max-ct
- filter-max-ipset
- filter-max-ipset-entry
- filter-bridge-max-rule
- vxlan-max-port
- vxlan-max-if
- vxlan-max-fdb
- reass4-max-queue
- reass6-max-queue
- ipsec-max-sp
- ipsec-sp-hash-slots
- ipsec-max-sa
- ipsec-sa-hash-slots
- ip-max-lpm-table
- ip-max-lpm-memory
- filter-max-cache
- filter6-max-cache
- vlan-max-if
- macvlan-max-if
- gre-max-if
- svti-max-if
- pppoe-max-channel
- mpls-max-label
- mpls-max-route
- mpls-max-lwt
- qos-max-schedulers
- qos-max-filters
- qos-max-classes
- bridge-max-if
- bridge-max-ports
- bridge-max-fdb
- fp-cur-if (state only)
- fp-cur-vrf (state only)
- ip4-cur-addr (state only)
- ip4-cur-route (state only)
- ip4-cur-neigh (state only)
- ip6-cur-addr (state only)
- ip6-cur-route (state only)
- ip6-cur-neigh (state only)
- pbr-cur-rule (state only)
- filter4-cur-rule (state only)
- filter6-cur-rule (state only)
- filter4-cur-ct (state only)
- filter6-cur-ct (state only)
- filter-cur-ipset (state only)
- vxlan-cur-port (state only)
- vxlan-cur-if (state only)
- vxlan-cur-fdb (state only)
- ipsec-cur-sp (state only)
- ipsec-cur-sa (state only)
- ip-cur-lpm-table (state only)
- ip-cur-lpm-memory (state only)
- vlan-cur-if (state only)
- macvlan-cur-if (state only)
- gre-cur-if (state only)
- svti-cur-if (state only)
- pppoe-cur-channel (state only)
- mpls-cur-route (state only)
- mpls-cur-lwt (state only)
- qos-cur-schedulers (state only)
- qos-cur-filters (state only)
- qos-cur-classes (state only)
- bridge-cur-if (state only)
- bridge-cur-ports (state only)
- bridge-cur-fdb (state only)
- 2.28.8. linux-sync
- 2.28.9. mirror-traffic
- 2.28.10. cpu-usage (state only)
- 2.29. logging
- 2.30. high availability
- 2.31. group